• Kingston HyperX Fury 16GB (2x 8GB) DDR4 3200MHz CL18

Tags: Kingston, HyperX, Fury, 16GB, (2x 8GB), DDR4, 3200MHz, CL18

Kingston HyperX Fury 16GB (2x 8GB) DDR4 3200MHz CL18



  • Brands Kingston
  • SKU: 182464
  • MPN: HX432C18FB2K2/16
  • Availability:
    • Auckland Showroom: 0
    • Wellington Showroom: 1
    • Suppliers Stock: 0

Kingston HyperX Fury 16GB (2x 8GB) DDR4 3200MHz CL18


HyperX HX432C18FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-3200 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total capacity is 16GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 18-21-21 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.340" (34.04mm), w/heatsink

Jedec/XMP Timing Parameters

- JEDEC/PnP: DDR4-3200 CL18-21-21 @1.2V
- XMP Profile #1: DDR4-3200 CL18-21-21 @1.2V
- XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V



18 cycles

Row Cycle Time (tRCmin)


Refresh to Active/Refresh Command Time (tRFCmin)


Row Active Time (tRASmin)


Maximum Operating Power


UL Rating

94 V - 0

Operating Temperature

0degC to +85degC

Storage Temperature

55degC to +100degC

Write a review

Please login or register to review