• Kingston 8GB 1600MHz DDR3 SODIMM KVR16S11/8 for laptop

Tags: Kingston, 8GB, 1600MHz, DDR3, SODIMM, KVR16S11/8, for, laptop

Kingston 8GB 1600MHz DDR3 SODIMM KVR16S11/8 for laptop

$67.00
  • Brands Kingston
  • SKU: 94079
  • MPN: KVR16S11/8
  • Availability:
    • Auckland Showroom: 0
    • Wellington Showroom: 0
    • Suppliers Stock: 2

DESCRIPTION
This document describes ValueRAM's 1G x 64-bit (8GB)
DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low
voltage, memory module, based on sixteen 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
204-pin SODIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:

FEATURES
ユ JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
ユ VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
ユ 800MHz fCK for 1600Mb/sec/pin
ユ 8 independent internal bank
ユ Programmable CAS Latency: 11, 10, 9, 8, 7, 6
ユ Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
ユ 8-bit pre-fetch
ユ Burst Length: 8 (Interleave without any limit, sequential with
starting address モ000ヤ only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
ユ Bi-directional Differential Data Strobe
ユ Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ᄆ 1%)
ユ On Die Termination using ODT pin
ユ Average Refresh Period 7.8us at lower than TCASE 85ᄚC,
3.9us at 85ᄚC < TCASE < 95ᄚC
ユ Asynchronous Reset
ユ PCB: Height 1.18ヤ (30mm), double sided component

SPECIFICATIONS
CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power (1.35V) = 2.721W*
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C

Write a review

Please login or register to review